The key to quality control in finishing is to ensure the appearance quality of clothing, especially the cleanness and smoothness of clothing. This paper focuses on the three links of buttonholing,custom tailor tape, ironing and decontamination of clothing. 1. Quality control of nail locking link The quality requirements of the buttonhole nail button are that the position is accurate, the nail button is firm, the button corresponds to the eye position, the buttonhole thread does not burst out, and the base cloth does not come out. The opening size shall be appropriate to ensure at least 6 threads in each buttonhole,large print tape measure, and no less than two upper and two lower threads shall be sewn. When the fabric is thick, the buttonhole thread shall be wrapped with high feet, and the height of the feet shall be adapted to the thickness of the seam allowance, and the ends of the feet shall not be exposed. At present, all kinds of buttonholes and button nailing equipment are complete, and different button types are suitable for different button nailing equipment. If the button is specially required to be sewn manually, garment measuring tape ,mini tape measure, the number of sewing threads in the buttonhole shall be ensured, and the sewing thread shall be threaded into the buttonhole at least twice when sewing the button.  In order to eradicate such stains,retractable tape measure sewing, we should start from the source and do a good job of 6S work on the spot. The finishing link requires relatively low skills of employees, but this link requires employees to be careful and highly dependent on locking nails and ironing equipment. Source; Dyeing Story Back to Sohu , see more Responsible Editor:. tape-measure.com