Forums » Discussions » 300-610자격증공부 - 300-610최신버전덤프데모문제

gywudosu
Avatar

만약 아직도Cisco 300-610시험패스를 위하여 고군분투하고 있다면 바로 우리 PassTIP를 선택함으로 여러분의 고민을 날려버릴 수 잇습니다, 우리 PassTIP에서는 최고의 최신의 덤프자료를 제공 합으로 여러분을 도와Cisco 300-610인증자격증을 쉽게 취득할 수 있게 해드립니다. 만약Cisco 300-610인증시험으로 한층 업그레이드된 자신을 만나고 싶다면 우리PassTIP선택을 후회하지 않을 것입니다, 우리PassTIP과의 만남으로 여러분은 한번에 아주 간편하게Cisco 300-610시험을 패스하실 수 있으며,Cisco 300-610자격증으로 완벽한 스펙을 쌓으실 수 있습니다,

Cisco 300-610 시험요강:

주제 소개
주제 1
  • Etermine Fcoe
  • Fibre Channel Interface
  • Evaluate Options For Interconnecting Data Centers Such As VXLAN EVPN And OTV
주제 2
  • Direct-Attached Storage (Appliance, FC Storage, And Fcoe Ports)
  • Evaluate Options For Storage Connectivity
주제 3
  • Evaluate Redundancy Options Such As Active
  • Active And Disaster Recovery Site
  • Evaluate Options For Ethernet Connectivity
주제 4
  • Evaluate Options For Network Orchestration And Automation
  • Evaluate Options For Layer 3 Connectivity
주제 5
  • Evaluate Qos Requirements In A Data Center
  • Services Insertion (Load Balancing, Security)
주제 6
  • Evaluate SAN Topology Options
  • Number Of Interfaces Vs. IOM Uplinks
  • Fibre Channel Adapter Policies
주제 7
  • Evaluate Options For Compute Orchestration And Automation
  • Evaluate Options For Layer 2 Connectivity
주제 8
  • Fabric Interconnect Operation Mode (Switch Mode, End Host Mode)
  • Redundancy
  • High Availability (Graceful Restart, NSF)
주제 9
  • Plan For Iscsi Deployment In A Data Center (Multipathing And Addressing Schemes)
  • Evaluate Data Center Technologies Such As Vpc
  • Vpc+
주제 10
  • Evaluate Options For Device And Routing Virtualization
  • Evaluate Options For Hyperconverged Infrastructure
주제 11
  • Global Policies Vs. Local Policies
  • Model-Driven Programmability
  • Ethernet Adaptor Policies
  • Service Profile Templates

>> 300-610자격증공부 <<

최신버전 300-610자격증공부 덤프샘플문제 다운로드

PassTIP는 여러분의 꿈을 이루어줄 뿐만 아니라 일년무료 업뎃서비스도 따릅니다. PassTIP에서 제공하는 덤프로 여러분은 1000%시험을 패스하실수 있고Cisco 300-610자격증을 취득하실 수 있습니다.지금 바로 사이트에서Cisco 300-610덤프데모 즉 덤프의 일부 문제와 답을 다운 받으셔서 체험하실 수 있습니다.

최신 CCNP Data Center 300-610 무료샘플문제 (Q202-Q207):

질문 # 202
Which orchestration tool provides a graphical interface to manage LAN and SAN fabrics?

  • A. Cisco CloudCenter
  • B. Cisco Data Center Network Manager
  • C. Cisco Virtual Topology System
  • D. Cisco Nexus Fabric Manager

정답：B 설명：
Section: Automation Design
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/DCNMOLH/SANClient/fmhelp/ fmc.html#34479
질문 # 203
Refer to the exhibit. A Cisco engineer is configuring a customer scenario with 2 x MDS 9000 switches 24 x UCS B200M6 blade servers. UCS 64S4 Fabric Interconnect in end-host mode and 3 x UCS 5108 server chassis with 2408 Fabric Extenders The engineer installs 6 x SQL Server 2019 on all blades and then notices that there are read and write latencies What is the best way to balance the utilization across the shared ports?

  • A. Disable restrictions on oversubscription ratios
  • B. Change the assigned speed to 8 Gbps Auto.
  • C. Enable "Only dedicate rate mode
  • D. Set 4 Gbps performance buffers

정답：A 설명：
Reference:
When restrictions on oversubscription ratios are disabled, the bandwidth allocation among the shared ports is proportionate to the configured speed. (If the configured speed is auto, then bandwidth is allocated assuming a speed of 4 Gbps.) For example, if you have three shared ports configured at 1, 2, and 4 Gbps, then the allocated bandwidth ratio is 1:2:4. In Cisco SAN-OS Release 3.0 and later (or when restrictions on oversubscription ratios are enabled), port bandwidths are allocated in equal proportions, regardless of port speed, so, the bandwidth allocation for the same three ports mentioned in the example would be 1:1:1.
질문 # 204
A Cisco engineer is preparing a service profile template for a design, which consists of 20 x UCS B200M6 blade servers 2 x UCS 6454 Fabric Interconnect in End Host Mode, and 3 x UCS 5108 server chassis with 2408 Fabric Extenders The blade servers are equipped with VIC 1480 adapters The engineer does not configure a vNIC/vHBA placement policy in the service profile and the vNICs and vHBAs are assigned to the vCon in a particular order What is the mapping scheme in which Cisco UCS assigns the vCons based on the type of server and the selected virtual slot?

  • A. round robin
  • B. network mesh
  • C. linear ordered
  • D. cross match

정답：A
질문 # 205
Drag and drop the Cisco Nexus 7000 Series Switch resources from the left onto the correct groups on the right.
정답： 설명：

질문 # 206
A Cisco UCS chassis with several blade servers, a pair of IOMs, and a pair of Cisco UCS Fabric Interconnects are installed in a data center.
Which two high-availability architectures are recommended between the IOMs and fabric interconnects? (Choose two.)

  • A. Any combination of one to eight links are supported to be used between each IOM and fabric interconnect.
  • B. Straight and cross-connect links should be used between the lOMs and fabric interconnects to offer higher availability.
  • C. The lOMs are connected with multiple straight and cross-connect links toward a pair of nonclustered fabric interconnects.
  • D. One, two, four and eight links are supported to be used between each IOM and fabric interconnect.
  • E. IOM is connected to the fabric interconnect that is acting as fabric A. and IOM B is connected to the fabric interconnect that is acting as fabric B.

정답：A,C
질문 # 207
...... PassTIP연구한 전문Cisco 300-610인증시험을 겨냥한 덤프가 아주 많은 인기를 누리고 있습니다. PassTIP제공되는 자료는 지식을 장악할 수 있는 반면 많은 경험도 쌓을 수 있습니다. PassTIP는 많은 IT인사들의 요구를 만족시켜드릴 수 있는 사이트입니다. 비록Cisco 300-610인증시험은 어렵지만 우리PassTIP의 문제집으로 가이드 하면 여러분은 아주 자신만만하게 응시하실 수 있습니다. 안심하시고 우리 PassTIP가 제공하는 알맞춤 문제집을 사용하시고 완벽한Cisco 300-610인증시험 준비를 하세요. 300-610최신버전 덤프데모문제: https://www.passtip.net/300-610-pass-exam.html